Back To Top

So-Lo's RATCHET ROD HOLDER(400-08, 400-09, 400-10 and 400-11) (all Stainless Steel construction) are universal rod holders, designed to "clamp on" any standard stanchion or rail. The ratchets are investment castings indexed at 10° for fine adjustment, and are welded to the rod holder tube. The gimbal pin is stepped, snapped in place, is fully welded thru the tube and "will not break out"!

So-Lo's FIXED STANCHION ROD HOLDER(400-12) (all Stainless Steel construction) is a 65° angled rod holder designed to clamp onto any standard 7/8" or 1" stanchion. When mounted on a bridge railing, these rod holders afford extra fishing or storage space for your rods without protruding inside the rails (see Outrigger Base for Center Rigger use). The FIXED STANCHION ROD HOLDERcan be easily swung out of the way or removed for bridge enclosures. The gimbal pin is stepped, snapped in place, is fully welded thru the tube and "will not break out"!

Back To Top

So-Lo's BULKHEAD ROD HOLDER(400-13) (all Stainless Steel construction) bolts (or screws) to any vertical surface where a rod holder is needed. The straps are spaced at 3-1/4" apart for easy mounting and use 1/4" bolts or #10 wood screws. The gimbal pin is stepped, snapped in place, is fully welded thru the tube and "will not break out"!

Back To Top

So-Lo's OUTRIGGER BASE (400-31) is designed to convert any standard fishing rod holder into a sturdy outrigger. The OUTRIGGER BASEwill accept any 1-3/8" outrigger pole. The base is indexed at 45° intervals and is reinforced for maximum strength! So-Lo's STANDARD FLUSH MOUNT ROD HOLDERS, OUTRIGGER BASES and any three-piece, 1 3/8" diameter fiberglass outrigger poles make the ideal combination for small boats. When not needed, simply remove and collapse your outriggers, and you have an extra set of quality fishing rod holders ready to use. So-Lo's OUTRIGGER BASEmakes an ideal center rigger when used in a FIXED STANCHION ROD HOLDER on a bridge railing.

Back To Top

So-Lo's ANGLE ROD HOLDER(400-51) (all Stainless Steel construction) is an extension rod holder built on a 30° angle and fits into a standard flush mount rod holder. The gimbal end cap is indexed at 45° increments which allows you to set your rod outboard or inboard at 30° or 15°. When anchored or drifting and the drift (or chum slick) goes one way and your boat goes the other way, index the ANGLE ROD HOLDER to the drift. "Keep your rod tip pointed in the right direction". All seams are fully welded. The gimbal pin is stepped, snapped in place, is fully welded thru the tube and "will not break out"! The WISHBONE & ANGLE ROD HOLDERSare rated for 130# class equipment and are a must for "canyon fishing".

When used in conjunction with So-Lo's WISHBONE ROD HOLDER, you can spread three standard length boat rods evenly across a 20' to 25' outboard boat (30° outboard, centered, and 30° outboard).

So-Lo's WISHBONE ROD HOLDER(400-52) (all Stainless Steel construction) is an extension rod holder built in a "Y" or WISHBONE design, and fits into a standard flush mount rod holder. The WISHBONE converts your flush mount into a two rod holder angled at 60° (30° inboard, and 30° outboard). The gimbal end cap is indexed at 45° increments for raising and lowering rod tips and controlling lure or bait action and depth. When anchored or drifting, and the drift (or chum slick) goes one way and your boat goes the other way, index the WISHBONE ROD HOLDER to the drift. "Keep your rod tip pointed in the right direction". All seams are fully welded. The gimbal pin is stepped, snapped in place, is fully welded thru the tube and "will not break out"! The WISHBONE & ANGLE ROD HOLDERSare rated for 130# class equipment and are a must for "canyon fishing".

When used in conjunction with So-Lo's ANGLE ROD HOLDER, you can spread three standard length boat rods evenly across a 20' to 25' outboard boat (30° outboard, centered, and 30° outboard).

Back To Top

So-Lo's EXTENSION ROD HOLDER(400-53) (all Stainless Steel construction) is a "Straight Extension", designed to adapt the arm of a fighting Chair gimbal and rail to a conventional fishing rod holder. Short butt stand up rods (straight and bent) and spinning rods can be fished from the arms of your fighting chair or unusually deep rod holders. The gimbal pin is stepped, snapped in place, is fully welded thru the tube and "will not break out"!

So-Lo's CLUSTER HOLDERTM (400-55) (all Stainless Steel construction) converts your standard rod holder to a practical, convenient 5 rod Fishing & Storage Unit. Place the CLUSTER HOLDERin a forward cockpit rod holder. Fish from one holder in the CLUSTER. When you "Hook Up" there are four extra holders in one spot - out of the way for other rods and equipment. When Canyon Fishing, nothing keeps a cockpit organized and equipment accessible like a CLUSTER HOLDER.

When "livebaiting" and you "hookup" or "pickup and run", put your livebaits in separate pails, in one place, out of the way!

The CLUSTER HOLDERis also very convenient for rod and reel washdown, setup and repairs, line transfer from one rod to another, and general equipment storage when running - all in one place, out of the way. Put an end to damaged rod tips, guides, reels, and tangled lines. "Concentrate on landing your fish, not avoiding your rods". The CLUSTER HOLDERfits all standard rod holders and will hold five straight or bent butt 130# class rods.

So-Lo's CONVERSION ADAPTER(400-59) (all Stainless Steel construction) is an insert which fits into all standard rod holders. It quickly and easily locks in place "short butt" (straight and bent) stand up type fishing rods. The adapter shortens the distance to the gimbal pin, engages the gimbal butt on your rod, preventing it from turning, and keeps your reel off the covering boards. (it also keeps most spinning reels off covering boards).

Back To Top

WHERE THERE'S ROOM FOR YOUR RODS, OUR RACKS WILL HOLD THEM

Both racks open for easy access
Snaps shut to lock - squeeze to unlock
Works in any position - vertical, horizontal or overhead

Makes Rod Storage A Snap!

• Made with rugged glass filled acetal - UV protected
• Tough on punishment - Easy on rods - Offshore proven
• Won't open at high speeds or in rough seas
• So-Lo "ROD RACKS" are designed to hold flyrods thru 50# offshore rods
• Securely holds fishing rods, gaffs and handles
  
• 450-11 Rod Racks (set- Butt& Butt) for gaffs and handles
• 450-12 Rod Racks (set- Tip & Butt) for standard rods
• 450-22 Rod Racks (set- Tip & Tip) for fly rods

Snaps shut to "lock"

Squeeze to "unlock"

Back To Top